Evaporator Coils, Condenser Coils, Water Coils, Steam Coils, Cooler Coils.
Evaporator Coil (Powder Coating)
Construction | Specification |
Fin Material | Aluminum, Copper, Pre-coated; Hydrophilic |
Fin Surface | V-wave, Sine wave, Flat, Louvered |
FPI | Adjustable |
Tubing | OD 7 mm, 7.94 (5/16″), 9mm, 9.52 mm (3/8″), 12.70 mm (1/2″), 15.88mm(5/8″) |
Row | 1, 2, 3, 4, 5, 6, 8, 10, 12(over upon request) |
Casing / Mounting | Galvanized Steel, Stainless Steel, Carbon Steel, Copper or Aluminum |
Header | Carbon Steel, Stainless Steel, Red Brass, Copper, (over upon request) |
Connections | Carbon Steel, Stainless Steel, Red Brass, Copper |
Materials
Fins
Regular Aluminum is the most common and cost effective fin material.
Copper has higher heat conductivity and mass, and is more costly than Aluminum.
Rifled
Condensers and evaporators for increased capacities.
Smooth
Standard in all coils
Fins Shapes
Louvered
Louvered fins increase the heat-transfer capacity by creating air turbulence which reduces the boundary layer on the fin’s surface, but at a cost of increased air-pressure drop across the coil.
Sine Wave
Sine wave fins improve the heat transfer factor to a higher degree than corrugated fins. These have about the same resistance to air flow as the corrugated fins.
Corrugated
Corrugated fins improve the heat transfer factor to a lower degree than louvered fins. They also have a lower resistance to air flow.
Flat
Flat fins reduce ice accumulation on fins. They have the lowest resistance to air flow.
Our mission
Our mission is to succeed in the market place through exceptional customer service, commitment to quality, competitive pricing, and on time shipments. Striving to be the reliable development partner with our customers.
Contact Info
Add: No 5 building, No 17, Second Alley, Qiaochang Road, Qiaotou Town, Dongguan City, Guangdong Province, China.
Tel: +86 400-678-8839
Mob: +86 138 2477 2972
Fax: +86 0769-23320649
Email: T[email protected]